![EUFAB 16458 Operating Instructions Manual Download Page 7](http://html1.mh-extra.com/html/eufab/16458/16458_operating-instructions-manual_2435049007.webp)
7
Mounting to the air vent
Fit the clamps of the holder to a fin of the air vent.
Mounting to the windscreen
Figure 1: Securing the
suction base
Figure 2: Releasing the
suction base
Figure 3: Charging port
Plug the micro-USB-B connector of the charging cable into the charging socket of
the inductive charger, Figure 3. Connect the USB connector of the charging cable
to a USB port of your vehicle or with a USB vehicle charger. The inductive charger
is now ready for use.
Fold the lever on the base of the holder upwards in the direction of the holding
arm. Place the inductive charger with the suction base on the windscreen and
push firmly against the glass, and then fold the lever downwards,
Figure 1.
Connecting the inductive charger
To release the holder, fold the lever on the base of the inductive charger up to-
wards the holding arm. Pull the tab on the suction base seal upwards to release
the base from the windscreen,
Figure 2.
Pull the holder for the smartphone apart and hold firmly. Position the smartphone in between and then
release the holder. The charging process is started automatically.
When used as directed, the inductive charger is maintenance-free.
Do not dispose of electrical devices with the household waste! Electrical and electronic
scrap must be collected separately and disposed of in an environmentally responsible
manner for recycling. Please contact your community or city administration regarding
disposal options for electrical and electronic scrap.
Clean the inductive charger with a soft, dry cloth only. Do not use cleaning agents.
The sealing surface of the suction cup may be cleaned with water of a diluted soap solution.
Separate the inductive charger from the on-board network of your vehicle when the
vehicle is switched off, otherwise the battery may be drained.
Charging
7. MAINTENANCE AND CARE
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com