7
When used as directed, the induction charger needs no maintenance.
Only clean the induction charger with a soft, dry cloth. Do not use any detergents.
Do not dispose of electrical devices with the household waste! Electrical and
electronic devices must be collected separately and sent for environmentally friendly
recycling. Please contact your community or city council regarding disposal options
for electrical and electronic scrap.
6. Operating instructions
7. Maintenance and care
8. Notes regarding environmental protection
9. Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com
Place the induction charger on the dashboard or
centre console of your vehicle. Use the most even surface.
Observe the safety precautions in section 4. Stick the
micro USB B connector of the charging cable into the
charging socket of the induction charger,
Figure 1
.
Connect the USB connector of the charging cable to the
USB port of your vehicle or to a USB vehicle charging
device. The induction charger is now ready to use.
Place your smart phone on the induction charger to charge it. Charging will start automatically.
To use your smartphone, i.e. as a navigation device, you
can fix it in the holder horizontally, see
figure 2
. Pull the
charging cable out of the induction charger and connect
it to your smartphone.
Figure 1:
Charging port
Bild 2:
Horizontal format
Once turned off, disconnect the induction charger from the on board electrical
system in your vehicle to prevent the battery discharging.
