15
3 ETROLINK™ CONFIGURATION PORT
The EtroLink™ USB Configuration Port provides an alternate method
of configuration.
The EtroLink™ USB Configuration allows configuration using a Quick Config
Wizard which requires no software installation.
3.1 OS Requirements
The PC which will access the IP camera using the EtroLink™ USB port requires
the following to run the EtroLink™ Quick Config Wizard:
• Windows XP (all editions)
• Windows 2000 (all editions)
• Windows 98 (SE)
Windows XP should run the wizard automatically.
Windows 2000 and 98(SE) require manually running the EtroLink™ Quick Config
Wizard.
3.2 Setup Using the EtroLink™ Config Port
The following discusses using the EtroLink™ Config Port using Windows XP.
With the exception of the automatic execution of the Quick Config Wizard, the
process is the same among all the Microsoft versions noted above.
A demonstration of how to manually start the Quick Config Wizard will be
provided at the end of this section.
Connecting the IP camera to the PC
1. Unplug the IP camera’s power cable and network cable
2. Connect EtroLink™ and PC via the mini USB cable.
3. Once the PC detects the IP camera, wait for a pop-up dialog prompting the
user for a program choice.
4. “Config Wizard” should already be highlighted; click OK.
