12
2 USING THE EV3151 FOR THE FIRST TIME
After altering the IP camera network settings, click Apply. A prompt for the
administrator authentication will be displayed:
The default password for the administrator account (root) is pass. Enter the
default password and click OK to confirm the changes.
After applying the new network settings, the IP camera will reboot; this process
takes about 45 seconds. The IP camera’s Power LED light will blink during the
reboot process; the light will become stable once reboot is complete.
Exit the “Setting Page” by clicking Close, and wait for the reboot to complete.
After rebooting, press Scan to verify the new IP address. If using DHCP, then the
MAC address may be necessary to accurately identify a specific camera.
Press Exit to quit EtroScan™.
2.4 Access the IP Camera Web Interface
MS Internet Explorer is used to access and configure the IP camera.
When accessing an IP camera using the web interface for the first time, some
configuration for ActiveX controls may be required.
1. Open the IE browser
2 Type in the IP address of the IP camera
3. Enter the administrator username and password:
User name: root
Default password: pass
