4
PTZ dome camera control settings
52
The top of the page includes a preview window as well as
Tilt
and
Zoom
controls. The arrows at the bottom
of the preview window can be used for viewing or setting left/right boundaries.
If the
360-degree Circular Scan
is checked, then the remaining settings related to the boundary scan will be
disabled.
Scan speed
can be adjusted as needed.
To configure the angle scan, move the camera to the desired left/right boundary. This can be done using
the directional arrows in the preview window or using the
Go Preset
button for a predefined point. Click
the
Set Left/Right Boundary
button to define the left/right boundary.
The
Go to Left/Right Boundary
will move the camera to the left/right boundary if defined.
The
button will swap the left & right boundary. The left boundary becomes the right boundary,
and vice versa.
The
Run
button can be used to preview the Auto Scan.
