3
Setup
37
Back to Day
also provides a range (+2-+12) which adjusts the sensitivity of the switch from night to day.
This value relates to the
From Day to Night
; the switch to day mode is based on the
From Day to Night
+
Back to Day
values.
NOTE:
Auto Mode (AE)
doesn’t differentiate between IR light and visible light. Subsequently, IR light can
cause the IR-Cut filter to switch back to Day mode.
While in night mode, if an object is close the image will appear bright from the IR light and result in the
Luminance Metering
to register a high value which can switch the camera back to Day mode. This is due to
Auto Mode (AE)
using image brightness.
So, the camera shouldn’t use this setting in environments where objects are close creating a “bright” image.
Alternatively, set the
Back to Day
to a high value to counteract this behavior.
Color & Sensor Settings
Image settings for both day and night are available via the Day & Night Time Profile tabs. The relevant
settings will be applied to the camera based on the camera’s present mode of operation (e.g. day or
night).
Color and sensor settings are as follows:
