Installation manual (ver. 2/2018)
ETLOC-50 SECURITY
3
I.
SIM card preparation
Make sure the new SIM card is active and disable its PIN code protection (the PIN can be
disabled via mobile phone). You can use either a prepaid or tariff SIM card. The ETLOC unit
communicates via mobile data and optionally via SMS commands
–
please pay attention to
the prices for these services during the selection of your provider.
Activate the SIM card according the service provider instructions. It is necessary to
disable
the SIM card PIN code protection
. Insert the activated SIM card into the micro SIM card
holder
. Pay attention to the
correct SIM card orientation
.
Note:
We recommend to activate roaming on the SIM card.
II.
Installation into the vehicle
1.
Placement of the unit
Pay special attention to the selection of a suitable place for installing the unit. We
recommend using the free space under the vehicle dashboard.
Description of the unit ETLOC-50 SECURITY
1
Wiring harness connector
2
SMB connector of GPS antenna
3
Green LED
–
GPS status
4
Orange LED
–
for service purposes
5
Red LED
–
GSM status
6
USB connector
7
Micro SIM card holder
8
Micro SIM card
IMPORTANT
Examples of suitable places for
installing the vehicle unit.
