manualshive.com logo in svg

ETIC SIG, User Manual, Page: 29 / 83

Share
Download
ETIC SIG User Manual Download Page 29

 

CONFIGURATION

 

SIG Router & VPN server 

User’s guide ref. 9017409-01

 

Page 29

 

Give a name to the connection and select 

the “ingoing” connection 

direction

 

option

. 

 

“Remote WAN IP address” parameter :  

Enter the IP network address and netmask assigned to the remote router 
over its WAN interface.

 

 

“Remote LAN address” & “Remote LAN netmask” parameters : 

Enter the IP network address and netmask assigned to the remote LAN. 
 

• 

Preshared key 

If the key used by the connection is the general PSK entered in the VPN 
menu,  no additional parameter has to be entered. 
 
If a particular PSK must be used, carry out the configuration of the 
connection as explained below.

 

 

“Use a specific key for this connection” parameter : 

If that option is not selected, the preshared key entered in the VPN  
configuration screen will be used by the router. 
If that option is selected, enter the specific key. 
 

“My WAN address & Remote WAN address” parameters :

 

Enter the WAN IP address of the router and the WAN IP address of the 
remote router. 

 
Attention : For ETIC certificates, this field is  the Email field 

 

• 

Certificate 

“My subjectAlt name” & “Remote subjectAlt name” parameters  : 

Paste the field "SubjectAltName" of the active certificate of the router you 
are configuring and the one the remote router.  
 

Attention : For ETIC certificates, this field is  the Email field. 
 

 
 

Summary of Contents for SIG




















































































Reviews:

No comments