manualshive.com logo in svg

ETIC SIG, User Manual, Page: 21 / 83

Share
Download
ETIC SIG User Manual Download Page 21

 

CONFIGURATION

 

SIG Router & VPN server 

User’s guide ref. 9017409-01

 

Page 21

 

 

 

6.3 

WAN  interface parameters 

The « Ethernet 4 » RJ45 connector is the WAN interface. 
 
The SIG can be connected to a company network or to any Internet router 
through that interface. 
 

• 

Select the « 

Internet

» menu and then «

 WAN interface

» and then 

“

Connection

”. 

 

“Obtain an IP address automatically” parameter  :

 

Set that option if a DHCP server  is in charge of attributing an the IP 
address of the WAN interface of the router. 
Otherwise, enter WAN interface IP address, netmask and default gateway 
IP address parameters. 

 
“IP address”   & “netmask” parameters : 

Enter the IP address and netmask assigned to the WAN interface of the 
router.

 

 

“Default gateway” parameter : 

Enter the IP address of the default gateway.

 

 
”Obtain DNS IP addresses automatically” parameter  : 

Select that 

option if the Domain name server IP addresses are provided automatically 
through the WAN interface. 
Otherwise, enter the DNS servers IP addresses. 

 

“

Primary DNS IP address” & “secondary DNS IP address” parameters  :

 

  

Enter the IP addresses of the domain name servers. 
  

“Activate network address translation” parameter  : 

If that option is selected, the  source IP address  of any packet coming 
from a device connected to the LAN interface and routed to the WAN 
interface, is replaced by the SIG router WAN IP address.

 

 

Summary of Contents for SIG




















































































Reviews:

No comments