ETIC SIG, User Manual, Page: 16 / 83

CONFIGURATION
Page 16
User’s guide ref 9017409-01 SIG Router & VPN server
2 Rebooting the router after parameters changes
•
After the parameters of any page have been entered, click the
« Save » button at the bottom of the page.
•
After some parameters changes, the SIG must restart.
When the configuration has been completely carried out, click the
«
Reboot » red button in the green bar, when displayed.
•
Once the product has restarted, check the « Reboot » button has
disappeared from the green bar.
T
o save the configuration file to a hard disk :
•
Select the “maintenance” menu and then the “Save / restore” menu.
•
Click the “Save current configuration to disk” button.
3 Recovering the IP address of the router
If you cannot access the SIG by any method, it is possible to recover the
stored IP address by using the ETIC FINDER software provided by ETIC
TELECOM.
4 Recovering the factory configuration
It may be necessary to restore the factory configuration of the router.
To restore the SIG factory configuration,
•
Switch OFF the SIG router.
•
Connect a key board to the USB port of the SIG router.
•
Switch on the SIG router.
•
Press ALT + CONTROL SUP at last 30 seconds after switching the
router on.
Remark : The stored configuration will be lost; the factory IP address
192.168.0.128 will be restored.