Eteros TRIMINATOR XL, User Manual

Page: 16 / 27

TRIMINATOR XL DRY OWNER'S GUIDE
16
REMOVING OBSTRUCTIONS
SERVICING YOUR TRIMMER
TRIMMING TIPS
For best efficiency, run batches of similar material through the machine. For a closer trim, run batches for longer
durations until desired trim is accomplished.
If the rotating slotted drum becomes restricted or clogged:
Proper maintenance is essential for safe, economical, and trouble-free operation.
To help you properly care for your trimmer, the following pages include a maintenance schedule. Other service tasks that
are more difficult, or require special tools, are best handled by professionals and are normally performed by a Triminator
technician or other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If you operate your trimmer under severe conditions,
such as sustained high-load or high-temperature operation, or use it in unusually wet or dusty conditions, consult your
servicing dealer for recommendations applicable to your individual needs and use.
Remember that an authorized Triminator servicing dealer knows your trimmer best and is fully equipped to maintain and
repair it. To ensure the best quality and reliability, use only new, Triminator Genuine parts or their equivalents for repair
and replacement.
1. Stop the motor.
2. Make sure that all rotating parts have come to a complete stop.
3. Disconnect the trimmer’s power cord.
4. Use a wooden stick to clear the obstruction.
NOTICE
Improper maintenance, or failure to correct a problem before operation, can cause a malfunction in which
you can be seriously hurt or killed. Always follow the inspection and maintenance recommendations and
schedules in this owner’s manual.
NOTICE
Trim Bin serves as a collection mechanism and a safety guard. Machine shall not be run without Bin in
place and tabs oriented in the vertical position.