Eteros TRIMINATOR XL, User Manual

Page: 11 / 27

11
INITIAL ASSEMBLY & INSPECTION
1. Inspect the crate and crate contents to ensure no damage occurred during shipping.
2. Carefully remove M9 Sorter from crate
3. Insert hopper Pins into Adjustment Blocks to lock hopper in position
4. Attach Shelf on the outfeed side of the Sorter by inserting holes on shelf onto pins and pushing down on shelf to
wedge in place.
5. Attach Slide-outs by hooking them onto the edge of the Slide Out Table. This will allow Slide-outs to be adjustable
6. Once initial assembly is complete, inspect the M9 Sorter to confirm that it is ready to operate:
• Confirm the power cord is in good condition
• Ensure the Sorter Belts are placed properly within pulley grooves
• Ensure Rear Tailgate is properly closed
• Ensure Casters are in the locked position
• Attach Slide-Outs to desired distance for sorting into totes
• Ensure Polycarbonate end covers are in place and Safety sensors activated
• Place a Tote under Slide-outs and on Outfeed Shelf to collect sorted material
© 2 0 2 1 E T E R O S T E C H N O L O G I E S I N C . A L L R I G H T S R E S E R V E D . | T H E T R I M I N A T O R . C O M