Eteros TRIMINATOR XL, User Manual

Page: 20 / 27

TRIMINATOR XL DRY OWNER'S GUIDE
20
• Reach inside the machine and install the shear band by gently placing the sheet on the metal tabs until
all holes are resting evenly on metal tabs on both sides of the machine.
• With motor off, power cord unplugged, and the machine in a vertical or 45 degree position, slide the
drum gently into the machine.
• Flip the pawl so it is in contact with the ratchet and prevents the ratchet from moving in a counter
clockwise direction.
• Turn the tension adjustment knob clockwise slightly until you encounter minor resistance and the shear
band has come in full contact with the drum.
1. Verify motor is in the Off position and power cord is unplugged.
2. Install Shear band
3. Install Drum
4. Re-tension the Shear band
DO NOT OVER TIGHTEN. DO NOT USE TOOLS OR OTHER MECHANISMS TO TIGHTEN TENSION.
REASSEMBLE FOR CLEANING
NOTICE
Very little tension is needed to create an effective cutting surface. As soon as full contact between drum
and shear band has been achieved, release the tension knob.