Eternal GU145 Series, Installation And Operation Manual

Page: 34 / 54

34
Optional Remote Controller Installation
Decide the appropriate mounting location for the Remote Controller; consider higher positions so that the
controller is out of reach for children.
Using a
 at head screw driver, or a penny, wedge the Remote Controller open to reveal mounting holes under the
cover.
Using the template, mark two 1/4" holes on the dry wall. Be sure that the holes are level.
Drill two 1/4" holes on the dry wall and insert Wall Anchors.
Connect wiring to the back of the remote display by loosening 2 screws.
Secure the Remote controller to the Wall Anchors using the included Mounting Screw 2 pcs and replace the
cover to hide the mounting hardware.
Remote Display Mounting Instructions
1.
2.
3.
4.
5.
6.
Template
Configuring Multiple Remote Controllers
Remote Controller Selection Switch Setting Layout
Kitchen
Bathroom 1
Room A
Room B
1 : Left
3 : N/A
1 : Right
3 : Left
1 : Right
3 : Right
1 : N/A
3 : N/A
1 : N/A
3 : N/A
2 : Left
4 : N/A
2 : Left
4 : N/A
2 : Left
4 : N/A
2 : Right
4: Left
2 : Right
4: Right
Bathroom 2
Rear Side
Note : Max. 100ft run
Room Controller B
Room Controller A
Remote Controller
Bathroom 2
Remote Controller
Bathroom 1
Remote Controller
Kitchen
Hole Plug