31
Optional Remote Controller Installation
Pre-Installation Preparation
Wiring Instructions
1. Turn off the unit and unplug power cord from wall socket.
2. Remove front panel by loosening 5 screws.
3. Open one of the pre-cut holes on either side panels of the unit and insert the hole plug.
1. Open the main controller PCB cover by removing 1 screw.
2. Run wire from the PCB to where the remote display is to be mounted through the hole plug.
3. Attach wiring to the PCB by loosening 2 screws on the main controller.
Precut Hole
Note : Max. 100ft run
Hole Plug
Remote Controller
