4 Ports ADSL2/2+ Router
36
4.3.1 CONFIG - WAN Setup
WAN Setup:
The
WAN
configuration page allows you to set the configuration for the WAN/ADSL ports.
ADSL connections can be configured in a variety of ways depending on the ISP/WAN configuration, and the
requirements of your home or office LAN. This 4 Ports ADSL2/2+ Router supports the following ADSL
connection types:
;
PPPoE
(RFC2516)
;
PPPoA
(RFC2364)
;
DHCP
;
Static
;
Bridged
(RFC1483)
;
CLIP
(RFC1577)
Configuring the 4 Ports ADSL2/2+ Router to match these connection types may require entry of some or all of
the following values:
;
ISP Account Username and Password
;
VPI/VCI
Setting
;
Encapsulation Type/Multiplexing ( Either LLC or VC, check with your ISP for details )
;
ADSL Handshaking Mode ( Default setting is MMODE )
;
Network Settings for Bridged Mode operation:
For Bridged Mode connections (RFC1483), the ISP will need to provide the following information:
;
DSL Fixed Internet IP address
;
Subnet
Mask
;
Default Gateway IP Address
;
Primary DNS IP address.
The next sections will describe in detail how to set up each of these connection types and save them as
Connection Profiles.
