Etec PTi-845 User Manual Download

Page: 67 / 130

4 Ports ADSL2/2+ Router

4.4 ADVANCED

The Advanced Menu provides access to advanced networking, management and routing capabilities. Click

the

ADVANCED

tab and the following screen will pop-up.

UPnP:

Configure UPnP for different connections.

SNTP:

Configure SNTP to configure time server on Internet.

SNMP:

Configure SNMP Management.

IP QoS:

Configure IP Quality of Service for different connections.

Port Forwarding:

Configure Firewall and NAT pass-through to your hosted applications.

IP Filters:

Configure Firewall to block your LAN PCs from accessing the Internet.

LAN Clients:

Configure LAN Clients.

LAN Isolation:

Disable traffic between LANs.

Bridge Filters:

Select to setup Bridge Filters.

Web Filters:

Select to setup Web Filters.

Multicast:

Configure Multicast pass-through for different connections.

Static Routing:

Configure Static routes.

Dynamic Routing:

Configure RIP.

Access Control:

Configure access control list.

Save All:

Click in order to permanently save the current configuration.

Summary of Contents for PTi-845



































































































































Search results

Summary of Contents for PTi-845

Reviews:

Related manuals for PTi-845

Brands by name

Popular brands

Etec PTi-845, User Manual

Search results

Summary of Contents for PTi-845

Reviews:

Related manuals for PTi-845

Brands by name

Popular brands