Etec PTi-845 User Manual Download Page 75

Page: 75 / 130

New IP:

If you wish to manually add a LAN client so that you can apply rules to it, click on the

New

button. The following screen will pop-up. Refer to

ADVANCED

LAN Clients

setting for more

details.

Enter the

IP Address

Hostname

and

MAC Address

as shown then click

Apply

to save your

setting.

DMZ:

A DMZ ( Demilitarized Zone ) is added between a protected network and an external

network, in order to provide an additional layer of security. When there is a suspected packet

coming from WAN, the firewall will forward this packet to the DMZ host.

The following screen will pop-up after clicking the DMZ button. Place a check to enable the DMZ

functionality. Select the

WAN Connection

LAN Group

and

LAN IP Address

from the drop down

manual. Click

Apply

to save and activate your setting.

4 Ports ADSL2/2+ Router

Summary of Contents for PTi-845



































































































































Search results

Summary of Contents for PTi-845

Reviews:

Etec PTi-845, User Manual, Page: 75 / 130

Search results

Summary of Contents for PTi-845

Reviews: