Etec PTi-845 User Manual Download

Page: 59 / 130

4 Ports ADSL2/2+ Router

4.3.2.1 LAN Setup - LAN Configuration

Click LAN Configuration and the following screen will be shown.

Click

Add

Remove

Interfaces from list under the different LAN Group. The LAN Group features

only supported under

Bridge

Mode

setting. Interfaces under the same LAN Group (Ethernet and

USB(Optional)) will have the ability to communicate with each other. Different LAN Group are

prohibited to communicate with one another.

Click

Configure

for detail LAN Group setting. Refer to next section for detail configuration and

setting.

Apply:

Click

Apply

to complete and save the connection profile.

Cancel:

Click

Cancel

to ignore all the changes.

Save All:

To complete and save the setting, click

Save All

after clicking the

Apply

button.

Summary of Contents for PTi-845



































































































































Search results

Summary of Contents for PTi-845

Reviews:

Related manuals for PTi-845

Brands by name

Popular brands

Etec PTi-845, User Manual

Search results

Summary of Contents for PTi-845

Reviews:

Related manuals for PTi-845

Brands by name

Popular brands