Introduction
3
Option kits available for the Echo Relay Panel Feedthrough (ERP-FT) include:
Option cards are available for field installation into the Sensor IQ. Each option adds another level of
features and functions to the Sensor IQ and the installation.
For more information on a specific option card, reference the appropriate installation guide supplied
with the option card.
0-10V Dimming Control
Model
Description
Notes
ERPFT-1PRK
WR6161-81, 20A @ 300V AC,
single pole, single space relay kit
field installed relay kit
ERPFT-2PRK
WR6166-81, 20A @ 300V AC,
double pole, single space relay kit
field installed relay kit
ERPFT-3PRK
WR6172-84, 30A @ 480V AC,
double pole, double space relay kit
field installed relay kit
ERPFT-RMK
19” Rack Mount kit
requires 15 rack units of space for
both the 12 and 24 relay versions.
Utilize two rack mount kits for the
48.
ERPFT-VB
Voltage Barrier Kit
used to separate differing voltages
and/or emergency circuits from
normal circuits. Use per local code.
ERPFT-TPH
Tamper Proof Hardware and Tool
For use with SmartSwitch Relay
Panel, Echo Relay Panel
Feedthrough, and SmartPack Wall
Mount
N o t e :
A single Sensor IQ supports the use of either the 0-10V output control option or a
DALI option card, but not both in the same panel.
J1 F
lu
or
es
ce
nt
1
9
-24
J2 F
lu
or
es
ce
nt
1
3
-18
J3 F
lu
or
es
ce
nt
7-12
J4 F
lu
or
es
ce
nt
1-6
The 0-10V Dimming Control option card (ERP-FT-LVD)
provides
24 outputs for control of 4-wire current-sink, 0-10VDC or
electronic loads.
• Each of the 24 outputs are rated to control a maximum
of 400mA per channel (up to 50 ballasts per channel).
• Loss of power at the Sensor IQ controller results in
releasing control levels to full.
• The ERP-FT-LVD option card installs using an included
wire harness.
