4
CEM3 Sensor Rack Retrofit Manual
* The need for these cards and the required quantity are based on specific enclosure type. For details contact
ETC Technical Services (see
Help from ETC Technical Services
).
Additional Items
CEM3 (Required)
7140A1003
1
Sensor3 AF Card (Optional)
7150B5623
up to 4*
Required Tools
#1 Phillips screwdriver
#2 Phillips screwdriver
1/16" (1.5 mm) or smaller precision flat head screwdriver
Dental pick or other small-point tool (for DIP switches)
Heat gun
Flush cutting diagonal wire cutter
Permanent marker
Wire strippers
Note:
A butane torch is not acceptable to shrink the large heat shrink. You must use a heat
gun.
Summary of Contents for Sensor3
Page 19: ...The Retrofit 17...
