6
Document Conventions
Throughout this manual, the following are used to alert you to notes and safety notices.
N o t e :
Notes are helpful hints and information that is supplemental to the main text.
C A U T I O N :
A Caution statement indicates situations where there may be undefined or
unwanted consequences of an action, potential for data loss or an equipment
problem.
W A R N I N G :
A Warning statement indicates situations where damage may occur,
people may be harmed, or there are serious or dangerous consequences
of an action.
W A R N I N G :
RISK OF ELECTRIC SHOCK! This warning statement indicates situations
where there is a risk of electric shock.
Safety
The Selador series fixtures are intended for professional use only.
Read entire User
Manual before using equipment.
Please note the following safety notices before use:
W A R N I N G :
Note the following safety warnings before use:
•
Do not mount the Selador series fixture on or near a flammable surface.
•
Use the fixture in dry locations only, where humidity does not exceed 90 percent (non-
condensing). Fixture is not intended for outdoor use.
•
Mount and support the fixture only by the primary suspension holes in the enclosure.
•
Suspend the fixture from a suitable structure using only the hardware rated for the
weight of the fixture.
•
In addition to primary suspension, attach a safety cable (ETC Model 400SC or other
approved safety cable or device) to the fixture housing. Appropriate attachment points
(holes) are provided in the protruding tabs on either end of the fixture housing.
•
Disconnect the unit from power and from DMX before all cleaning and maintenance.
•
Maximum ambient temperature: Ta=40°C (104°F)
•
Maximum exterior surface temperature: Tmax=80°C (158°F)
•
External Temperature after 5 minutes of full-brightness operation and 23°C (74°F)
ambient: 38°C (100°F)
•
External Temperature (steady state achieved) at 23°C (74°F): 70°C (158°F)