ETC Setup and Connect Guide
Paradigm Touchscreen Interface
Paradigm Touchscreen Interface Setup and Connect Guide
Page 7 of 14
ETC
[Install from Online P-CCS]
Virtual Touchscreen Software installs from any discovered and online Paradigm Central
Control Server (P-CCS).
1:
Touch [Install from Online P-CCS]. The Application Shell provides a list of all discovered Central
Control Servers (P-CCS) by IP address. Be patient as this process could take up to a minute depending
on network traffic,
2:
Touch to select the server IP from the discovered list, then touch the [Install]. During this installation
process, the touchscreen will shut down then restart again, automatically launching VTS at restart.
For instructions on use of Virtual Touchscreen Software, reference the Paradigm Virtual Touchscreen
Setup Guide, available for download on the ETC website at
etcconnect.com
.
• To cancel the installation and return to the “General” tab, touch [Cancel].
• To request a refreshed list of online and discovered P-CCS, touch [Refresh List].
