ETC Setup and Connect Guide
Paradigm Touchscreen Interface
Paradigm Touchscreen Interface Setup and Connect Guide
Page 5 of 14
ETC
General Tab
The “General” tab is provided as the interface to launch and manage the Virtual
Touchscreen Software (VTS).
[Launch Virtual Touchscreen]
The Paradigm Virtual Touchscreen Setup Guide is available for download on the ETC website at
etcconnect.com.
Install Management
This section of the “General” tab provides the ability to [Uninstall] VTS or install a newer version from either
removable media or the connected Paradigm Central Control Server (P-CCS).
Note:
Touchscreen configurations are created in ControlDesigner and associated to a Virtual
Touchscreen instance in LightDesigner. Reference the online help systems for
ControlDesigner and LightDesigner for details to create and associate touchscreen
configurations.
Note:
If a version of VTS is currently installed, the [Install from Removable Media] and [Install
from Online P-CCS] buttons are disabled. You must first uninstall the software before
installing a new version. Reference
[Uninstall]
on the following page for details.
To launch Virtual Touchscreen Software, touch the [Launch
Virtual Touchscreen] button located on the “General” tab.
The application launches to the “Discovered Servers” list.
Select the Central Control Server to continue with Virtual
Touchscreen configuration selection.
