ETC Setup and Connect Guide
Paradigm Touchscreen Interface
Paradigm Touchscreen Interface Setup and Connect Guide
Page 4 of 14
ETC
Application Shell
The Application Shell includes the interface to launch Virtual Touchscreen Software (VTS), which was has
been installed at the factory before shipment. In addition, the Application Shell provides access to the
Touchscreen Interface’s IP and network settings, as well as advanced features which can be password
protected.
Notice the lower right hand corner of the shell displays software versions of both the “Shell Version” and
the “App Version”. The “App Version” represented is the version of Paradigm Virtual Touchscreen
software that is currently installed. If no “App Version” is installed, install the application from the Online
PCCS or install the VTS application from removable media.
Three tabs are located on the Application Shell including “General”, “Device Setup” and “Advanced”.
Note:
The Application Shell software is included with each installation of the P-TSI. Updates to
the shell are combined with Virtual Touchscreen Software when necessary.
