ETC Setup and Connect Guide
Paradigm Touchscreen Interface
Paradigm Touchscreen Interface Setup and Connect Guide
Page 13 of 14
ETC
[Set Password]
By factory default, a password is required to access the “Advanced” tab as well as to uninstall Virtual
Touchscreen Software. The factory set password is 4116.
1:
To specify a user configurable password, touch [Set Password]. The alphanumeric keypad displays.
2:
Enter the new password and touch [Enter] to close the keypad. A dialog will display confirming the
password is set.
Password Enabled
The status of the Password Enabled checkbox next to the [Set Password] button determines whether or not
a password is required anywhere in the Application Shell. By default, this checkbox is enabled. To disable
the password requirement, touch the checkbox, leaving the box unchecked.
