Safety Considerations
5
General Operation and Use Guidelines
l
This fixture is only allowed to be operated with the maximum alternating current that is
stated in the technical specifications label provided on the fixture.
l
Lighting effects are not designed for permanent operation. Consistent operation breaks may
extend the life of the fixture.
l
When choosing the installation location, make sure the fixture will not be exposed to
extreme heat, moisture, or dust.
l
Do not point the lens toward the sun or other bright light source. Doing so could damage the
fixture.
l
If using the supplied Omega brackets with quick-locking thumb screws for fixture hanging,
ensure that the thumb screws have engaged a complete 90-degree positive latch.
l
Operate the fixture only after having familiarized yourself with its functions. Do not permit
persons who are not qualified and familiar with its functions to operate the fixture.
l
Do not modify the fixture. Any modifications will void the warranty.
l
This manual describes the proper installation and operation of this fixture. Using this fixture
in any way other than the intended use may cause damage and void the warranty.
l
When the fixture has been stored or transported in cold temperatures, allow it to warm to
room temperature for a minimum of one hour before applying power. Applying power to a
cold fixture may cause damage to the fixture and void the manufacturer warranty.
l
When you power on the fixture, you may notice smoke or odor. This is normal and should
decrease gradually. If smoke or odor persists, disconnect the fixture from power and contact
your ETC dealer or Technical Services.
l
Please use the original packaging if the fixture is to be transported. ETC will not be
responsible for the fixture if packaging other than manufacturer provided packaging is used.
