24
Lonestar User Manual
The prism assembly (shown at right) is located near the front lens on the
left side of the fixture head when the front lens is facing away from you
and the tilt lock is to the right of the fixture head.
3. If necessary, gently push the zoom lens toward the front lens to move it
away from the prism assembly. Take care to not touch the zoom lens
itself.
4. Remove the prism carrier from the prism assembly.
a. Open the clip on the front edge of the prism carrier.
b. Grasp the edges of the prism carrier and lift it slightly to separate it from the prism
assembly.
c. Slide the prism carrier from the assembly.
