Configure the Fixture
17
Set Fixture Parameters
This section provides instructions to configure and set up the Lonestar. See
for information about the navigation buttons.
Provide power to the fixture before configuring it. If you do not provide power, the fixture will
use battery power to power the user interface.
DMX Address
Navigate: Main Menu
→
Address
Set the DMX address for the fixture. The default value is 001.
Info Menu
Set the Time Information
Navigate: Main Menu
→
Info
→
Time Info
Parameter
Value
Description
Current Time
XXXX (Hours)
Running time of the fixture from the last time that the
fixture was powered on, shown in hours (h). The
counter resets after the fixture is turned off.
Ttl Life Hrs
XXXX (Hours)
Total running time of the device, shown in hours (h).
Last Run Hrs
XXXX (Hours)
Running time of the fixture from the last time that the
run time value was reset, shown in hours (h).
LED Hours
XXXX (Hours)
Total running time of the fixture LEDs, shown in hours
(h).
Timer PIN
Timer PIN XXX
You must enter the Timer PIN in order to access the Clr
Last Run menu item. The default Timer PIN is 038.
Clr Last Run
l
ON
l
OFF
This password-protected menu item resets the Last Run
Hrs value. You must enter the Timer PIN to access this
menu item.
Select ON to clear the value for the Last Run Hrs
parameter for the fixture.
LED Time PIN
LED Time PIN XXX
You must enter the LED Time PIN in order to access
the Clear LED Time menu item. The default LED Time
PIN is 038.
Clear LED Time
l
ON
l
OFF
This password-protected menu item resets the LED
Hours value. You must enter the LED Time PIN to
access this menu item.
Select ON to clear the value for the LED Hours
parameter.
View Fixture Errors
Navigate: Main Menu
→
Info
→
Error History
Displays any current fixture errors. See
for information about the errors.
