ETC Installation Guide
ColorSource Spot V1.0
Play Presets and Sequences
The fixture has twelve factory-configured presets and five factory-
configured sequences. When you play a preset or sequence on a fixture:
•
The same preset number or sequence number plays on any
connected fixtures that are not receiving DMX.
•
If you power down the fixture, the preset or sequence resumes when
you power it on again.
You can re-record presets and sequences through an RDM device or
manually on the fixture. See
Re-record Presets on the next page
1. Press the Mode button to activate the Presets/Sequences menu. The
last active preset or sequence plays automatically. (If DMX data is
present, the current preset or sequence plays in the background and
DMX data continues to take priority.)
2. Press the Up button or Down button as needed to scroll through the
available presets and sequences.
3. To stop the selected preset or sequence, press the Mode button a
second time. The display will revert to show the DMX start address.
Pre-configured Presets
Preset
Name
1
3200 K White
2
5600 K White
3
Red
4
Green
5
Blue
6
Cyan
Preset
Name
7
Magenta
8
Yellow
9
Orange
10
Light Yellow
11
Light Blue
12
Light Pink
Pre-configured Sequences
Sequence Name
1
Rainbow Fast
2
Rainbow Slow
3
Warm Colors Fast
4
Cool Colors Fast
5
Random
ColorSource Spot V
Page 11 of 20
ETC
