ETC Installation Guide
ColorSource Linear Pearl v1.7
ColorSource Linear Pearl v1.7
Page 9 of 20
ETC
Setting the Grouping mode
The ColorSource Linear 2 and the
ColorSource Linear 4 fixtures have
two Grouping modes:
• Group: Entire array functions as
a single fixture.
• Cell: Each 0.5 m segment (or
“cell”) of the array functions as
a distinct fixture with a
separate DMX start address.
To set the Grouping mode, press the
Grouping button until the LED
indicator for the chosen mode
illuminates.
In Cell mode, each cell is assigned a DMX address based on the DMX address
of the fixture (see
Setting the DMX address
on
page 8
) and the current DMX
control mode (see
Changing the DMX control mode
on
page 8
). For example,
if you set the DMX address on the fixture to 100, set the DMX mode to
Variable Color Temperature, and set the Grouping mode to Cell, the starting
DMX address of the first cell will be 100 and the starting DMX address of the
second cell will be 102.
DMX control channels
Linear 1 and Linear 2/Linear 4 in Group mode
*Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase
the strobe rate from 1 per second up to 33 per second.
DMX
Channel
(Variable
Color Temperature)
(Direct)
(1 Channel)
1
Intensity
Intensity
Intensity
2
Color temperature
Warm white
3
Cool white
4
Strobe*
Group and Cell
LED indicators
Grouping
button
