ETC Installation Guide
ColorSource Linear Pearl v1.7
ColorSource Linear Pearl v1.7
Page 6 of 20
ETC
Setting up the fixture
See the fixture illustrations below and on the following page for reference.
1:
Plug power cord into the powerCON In connector on the rear of the
fixture.
2:
Make any power-thru cable connections prior to applying a power
source.
3:
Make any DMX connections, and if the fixture is the last in a DMX line,
terminate the fixture. See
Connectors
on
page 5
.
4:
Plug power cord into power source.
Data in
and thru
connectors
User interface
(display)
Power in
and thru
connectors
Mode button
Up and
Down
buttons
Trunnion
locking
knob
Trunnion
locking knob
Linear 1
Mode button
