ETC Installation Guide
ColorSource Linear Pearl v1.7
ColorSource Linear Pearl v1.7
Page 8 of 20
ETC
Mode button
Pressing the Mode button activates the Presets menu; the last active preset
plays automatically. Pressing the Mode button a second time deactivates the
selected preset. The display will revert to show the DMX start address.
• If DMX data is present, the current preset plays in the background and
DMX data continues to take priority.
• If DMX data is lost and a preset is active in the background, the last
selected preset automatically plays.
Setting the DMX address
1:
Press any button to wake the display. The display shows the DMX
address.
2:
Use the Up and Down buttons to select the DMX address for the
fixture.
You can also use RDM for DMX addressing. See
Using RDM
on
page 19
.
Changing the DMX control mode
You can set the DMX control mode for the fixture to one of three available
mode options.
1:
Press any button to wake the display. The display shows the DMX
address.
2:
Press and hold the Mode button for 3 seconds. The display shows the
current DMX control mode.
3:
Press the Up and Down buttons to change the DMX control mode.
•
: Variable color temperature (intensity or color temperature).
This is the default mode.
•
: Direct emitter control (intensity, warm white, cool white,
strobe).
•
: 1-channel mode controls the intensity of preset 1 (defaults to
3000K White).
4:
Press the Mode button to confirm your selection.
The display will automatically return to the DMX address after 10 seconds of
inactivity, and edits to the DMX control mode will not be saved. This cancels
unsaved changes.
