ETC Cobalt 10, User Manual

Page: 108 / 1076

Cobalt 8.1 - 20181029
106
Drag and Drop
In most places of the Cobalt screen interface you can use a mouse or trackball to drag content to other
locations and drop there. This is the same as doing a copy/paste or cut/paste command with key
presses.
Please note that there are two options for drag-and-drop editing within Cobalt - editing within the
same play and using drag/drop to import data from another play - this can be an older version of the
current play to perform UNDO actions, or another play entirely.
Usually there is a dialogue box to allow you a choice of results when dragging and dropping.
Examples
•
In the Browser, click and hold a preset in the preset node and drag it to a channel view and
drop there to replace the content of that channel view with the preset.
•
In a Sequence Editor, click and hold a sequence step and drag it to another sequence step
and drop there for a dialogue with options of actions (copy/move). See
Sequence - drag and
drop data .
•
In a Master View, click and hold the content of one master, then drag and drop to another to
move around. See
Masters - Drag and Drop Data .
Dragging a preset from the Browser to Live
1. Click, hold and drag a preset from the Browser to Live.
2. Drop over Live - the content in Live will be replaced by the levels of the channels in that Preset.