ETAS ES5392.1, User Manual

Page: 9 / 54

ES5392.1 High Current Switch Board (6-CH) - User’s Guide 9
ETAS Introduction
General Safety at Work
Follow the existing regulations for work safety and accident prevention. All appli-
cable regulations and laws regarding operation must be strictly adhered to when
using this product.
1.2.4 Intended Use
The ES5392.1 is an add-on card for the ES5300.1-A Housing and the ES5300.1-B
Housing for mapping battery nodes (KL15, KL30,…), for mapping high current
switches and for remote control of power supplies.
The ES5392.1 add-on card has the following components:
• Battery node simulation (KL15, KL30, …) for connecting ECUs and loads
• Current measurement for every battery node / high current switch
• MRC simulation
• Digital and analog input / output interfaces for remote control of a power
supply that simulates the vehicle battery
• Interface to the ES5300.1-A Housing and ES5300.1-B Housing
The ES5392.1 may be installed and operated only in the ES5300.1-A Housing
and the ES5300.1-B housing.
The intended use of the ES5392.1 in an ES5300.1-A Housing or ES5300.1-B
Housing is:
• Use in industrial lab facilities or workplaces.
• Hardware interface for ECUs in a hardware-in-the-loop test system.
• Cooperation with ETAS software which supports the ES5300.1-A Housing
or the ES5300.1-B Housing.
• Interface in cooperation with software programs that operate the stan-
dardized, documented and open APIs of ETAS software products.
The ES5392.1 is not intended to be used:
• Within a vehicle on the road.
• As part of a life support system.
• in applications where misuse can lead to injuries or damages.
• In environments in which conditions prevail that fall outside the specified
ranges: see "Ambient Conditions" on page 49.
• With signal conditioning that falls outside the specified ranges: see "Tech-
nical Data and Standards" on page 47 (voltages, currents and power con-
sumption).
Requirements for the Technical State of the Product
The product is designed in accordance with state-of-the-art technology and rec-
ognized safety rules. The product may be operated only in a technically flawless
condition and according to the intended purpose and with regard to safety and
dangers as stated in the respective product documentation. If the product is not
used according to its intended purpose, the protection of the product may be
impaired.