ES5392.1 High Current Switch Board (6-CH) - User’s Guide
19
ETAS
Design, Installation and Fuses
Fig. 2-2
Top view of the ES5392.1 High Current Switch Board (6-CH)
Blue frame: heat sink
2.2
Connectors CO200, X1 PwrCtrl, X2 SwCtrl, X3 Battery Input and
X4 Power I/O
The connectors of the ES5392.1 are shown in Fig. 2-1 on page 18.
The pin assignment of the plugs are listed in the chapter "Connections and Con-
nectors" on page 39. The input and output signals are described in "Signals"
on page 31.
Backplane Connector CO200
The connection of ES5392.1 to the ES5300.1-A Housing or to the ES5300.1-B
housing is done via the PCIe connector CO200 (Fig. 2-1 on page 18). CO200 is
also used to provide the voltage supply of the ES5392.1.
Connector X1 PwrCtrl
The connector X1 allows controlling an external power supply.
Connector X2 SwCtrl
The connector X2 provides generic digital TTL signals that can be used, e.g. to
switch external relays or connect an ES4408CON.1 (via CBV305.1-2 cable).
Connector X3 Battery Input
The output DC voltage of an external power supply is connected to the connec-
tor X3 (see Fig. 1-2 on page 7).
Connector X4 Power I/O
The connector X4 Power I/O can be used to connect ECUs or external loads.
Furthermore, the connector features digital TTL outputs and an input for the
MRC signal.
