eta gratus expert, Instructions For Use Manual, Page: 53 / 64

F3 – Knife F7 – Pus her
F4 – Knife sealing F8 – Release lever
Safety hints and tips
– Do not let the blender running without any food!
– Do not remove the knife support
F2
from the glass container!
– Never pour boiling liquids in the container. High temperature could damage the
container and cause breaking the glass. Always put the lid and stopper on the
container before on-switching the appliance. Never remove the container lid F1 when
the motor unit is running.
– Before removing the blender lid or container, wait until the rotating parts completely stop.
– When mixing liquids, never use larger volume than the level marked on the container.
– You may also process hot liquids up to 80 °C, for example sauces or soups.
Assembly
Assemble the blender and attach it to the blender mount
A10
according to Figures 9 a 10.
Instead of the plug for adding liquids
F5
you can also insert the pusher
F7
in the opening
in the lid if you are going to use it. Apply reverse sequence to disassemble the unit and to
remove it from the mount.
Before the first use
We recommend washing the glass container before using it for the first time. The knife
section is treated with oil not harmful to health for technological reasons. Therefore first fill
in the container with warm water (max. 50 °C) with a small amount of detergent. Then put
the container on the food processor, set the maximum rotational speed and run for
1 minute. Then rinse the container with clear water.
Use
The blender is designed to mix juices, milk cocktails, soups, sauces, children food and
dietetic food, light dough, biscuit dough, puree, etc. Remove the lid, put or pour the food
into the container and replace the lid. To press larger pieces of ingredients to the knife, use
the pusher F7 .
Always set the speed with regard to the kind and amount of ingredients being processed,
and particularly with regard to ripeness of fruit and vegetables. We recommend that you
always switch on the blender to minimum revolutions and then gradually increase the
performance as required.
The recommended processing speed is
1 to MAX .
Tips
– When the appliance is in operation, it is only possible to add liquid ingredients
(e.g. water, milk, oil, etc.).
– The longer you process the food in the blender, the finer the mixture is.
– Never use the pusher F7 individually without the lid F1 .
– If you are going to process larger amount of food, divide it into batches not to overload
the motor unit of the multifunctional head.
– Cut tougher substances into small pieces, otherwise the knife F3 will soon become blunt.
– If you are going to mix ice cubes, their size should not exceed 40x40x20 mm, otherwise
the knife F3 becomes blunt or the motor unit is overloaded.
53
GB
/ 61