eta 9166, Instructions For Use Manual

Page: 15 / 32

II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – toaster
A1 – toasting guide
A2 – revolving regulator
A3 – STOP button with control light
A4 – defrost button with control light
A5 – reheat button with control light
B – breadcrumbs tray
Note
When the control light is on, it signals that the function is on.
III . PREPARATION FOR USE
Plug the power cord connector to an electric socket. When you put the appliance into
operation for the first time, set the revolving regulator to level 3 and switch on the toaster
at least 4–5 times (without any bread in) with a window open and then leave to cool down.
Toasting regulator (A2)
Set the required toasting level by turning the regulator clockwise. If in doubt, start from
the lowest level.
Level 1 – the shortest toasting time, the toasted bread is the lightest.
Level 2–3 – slightly toasted bread.
Level 4–6 – moderately toasted bread.
Level 7 – the longest preparation time, the toasted bread is the darkest.
STOP button (A3): by pressing the button you stop the set function of the toaster.
Defrost button (A4): intended for preparation of frozen slices of bread.
Reheat button (A5): intended for warming cooled down toasts or finishing half–done toasts.
IV. INSTRUCTIONS FOR USE
Toasting bre ad
Select the toasting level by the regulator A2 . Put slices of bread to the toasting slot. Push
A1 guide down so that it is secured in the lower position. The operation control light A3
comes on and the appliance starts toasting immediately. After the set time the appliance
is turned off automatically and the guide goes up.
Warming function
The function is not dependent on setting the toasting regulator and the time of preparation
is shorter than in toasting at level 1. Follow the same procedure as in paragraph Toasting
bread, and after pushing the guide A1 down push the reheat button A5 (the control light
will come on).
15
GB
/ 27