EN
EN - 106
1. Remove the basket and then unscrew and remove the cap from the salt container.
2. If you are filling the container for the first time, fill 2/3 of its volume with water
(around 500 ml).
3. Place the end of the funnel (supplied) into the hole and introduce about 1,2 kg of salt.
It is Normal for a small amount of water to come out of the salt container.
4. Carefully screw the cap back on.
5. Usually, the salt warning light will be off in 2-6 days after the salt container be filled with salt.
6. Immediately after filling the salt into the salt container, a washing programme should
be started – suggest to use the rapid programm. Otherwise filter system, pump or other
important parts of the machine may be damaged by salty water. It is out of warranty.
NOTE:
•
The salt container must be refilled when the salt warning light in 1. the control panel
comes on. Though the salt container is filled enough, the indicator light may not black out
before the salt fully dissolve. If there is no salt warning light in the control panel (for some
models) , you can judge when to load the salt into the softener by the cycles that the
dishwasher had run (see the foregoing schema ).
•
If there are spills of the salt, a soak program could be run to wipe them out.
Function of Rinse Aid
•
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and
spot and streak free drying.
ATTENTION!
Only use branded rinse aid for dishwasher. Never fill the rinse aid
dispenser with any other substances (e.g. dishwasher cleaning
agent, liquid detergent). This would damage the appliance.
When to Refill the Rinse Aid Dispenser
•
If there is no rinse-aid w arning light in the control panel, you can judge t he amount of
rinse-aid by the color of the optical level indicator “D” located next to the cap. When the
rinse-aid container is full, the whole indicator will be dark .As t he rinse-aid diminishes,
the size of the dark dot decreases. You should never let the rinse aid get below 1/4 full.
•
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator
changes, as illustrated below.
Summary of Contents for 138490000F
