eta 138490000F, Instructions For Use Manual

Page: 107 / 164

EN
EN - 107
Full
¾ Full
½ Full
¼ Full
Empty
Rinse aid dispenser
1. To open the dispenser, turn the cap to the “open” (left) arrow and lift it out.
2. Pour the rinse aid into the dispenser, being careful not to overfill.
3. Replace the cap by inserting it aligned with “open” arrow and turning it to the closed
(right) arrow.
• The rinse aid is released during the final rinse to prevent water from forming droplets
on your dishes that can leave spots and streaks. It also improves drying by allowing
water to sheet off the dishes.
• Your dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is
located inside the door next to the detergent dispenser. To fill the dispenser, open the
cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
• The volume of the rinse aid container is about 110 ml.
• Be careful not to overfill the dispenser, because this could cause over sudsing.
Wipe away any spills with a damp cloth.
• Don‘t forget to replace the cap before you close dishwasher door.
ATTENTION!
Clean up any rinse aid split during filling with an absorbent
cloth to avoid excess foaming during the next wash.