eta 138490000F, Instructions For Use Manual

Page: 125 / 164

EN
EN - 125
Problem Possible Causes What to do
Black or gray marks
on dishes
Aluminum utensils have
rubbed against dishes
Use a mild abrasive cleaner to eliminate those
marks.
Water standing in the
bottom
of the tub
This is normal
A small amount of clean water around the
outlet
on the tub bottom keeps the water seal lubri -
cated.
Dishwasher leaks
Overfill dispenser or rinse
aid spills
Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and
lead to overflowing. Wipe away any spills with
a damp cloth.
Dishwasher isn‘t level Make sure the dishwasher is level.
Water flow out
Damaged or detective
drain pump
Replace the drain pump
Error codes
When some malfuctions come on, the appliance will dissplay eror codes to warn you:
Codes Meanings Possible Causes
E1 Longer inlet time.
Faucets is not opened, or water intake
is restricted,or water pressure is too low.
E3 Not reaching required temperature. Malfunction of heating elenent.
E4 Overflow. Some element of dishwasher leaks.
Ed
Failureofcommunicationbetweenmain
PCB with TFT PCB.
Open circuit or break of wiring
for the communication.
WARNING! If overflow occurs, turn off the mainwater supply before calling
service. If thre is water in the base pan because of an overfill or small
leak, the water should be removed before restarting the dishwasher.