14
F1
F2
F4
F5
SLAVE
AMP
MASTER
AMP
IN/OUT
LCH
RCH
LCH
RCH
LINE INPUT
LINE OUTPUT
F3
F6
R1
Protect
Bridge
BRIDGE
R4
R2
R3
R5
R6
F1
IN/OUT-MASTER/SLAVE
Output of the Slave- or Input of Slave-Amplifier.
F3
LINE INPUT
This allows you to connect the amplifier with the head unit via an RCA to RCA cable.
F4
LINE OUTPUT
Provides a full range line level (RCA) output that allows the use of additional amplifiers.
F6
REMOTE
Terminal for remote control to adjust the Bass Boost.
F5
BALANCED INPUT
Accepts balanced line inputs for the accordant line driver.
F2
MASTER/SLAVE SWITCH
This allows you to select between Master or Slave mode. See page 18.
R1
FUSE
Fuse block to prevent damages of the amplifier. Attend the notes on page 12!
R3
BATT +12V
Connection for the plus terminal of the vehicle`s battery. Attend the notes on page 12!
R2
REM
Connection for remote turn-on of the head unit. Attend the notes on page 12!
R4
GROUND
Connection for the ground (minus terminal). Attend the notes on page 12!
R6
SPEAKER OUTPUT
Connection for the one or two subwoofers. Attend the several examples on the following pages!
R4
PROTECT BRIDGE
Connection for Protect Cabel to connect the Master- and Slaveamp. See page 18!
FUNCTIONS & CONTROLS FRONT/REAR PANEL
Monoblock Amplifier VE1000.1 / VE1800.1