51
Program
Heading "LOK CHANGE" the individual functions such as name, ad ress,
change, etc.. The last function one finds the possibility of register programming
(REG). Choose this menu item for writing CVs.
• First, select the CV (from the Mobile Station ® "REG" loading records) and then
the desired value and confirm this each by pressing the toggle button.
• The Mobile Station ® will program the new value into the decoder once.
Please remove before programming necessarily all other locomotives that are
not to be programmed!
8.2.5. Programming with Märklin® Mobile Station ® 2
For programming with the Mobile Station ® 2, follow the instructions the manual
for programming DCC decoders.
8.2.6. Programming with Märklin® Central Station
The Central Station ® 1 in the software to version 2.04, a program CVs 1 to 80 is
possible via the Motorola® programming menu. Unfortunately, the Central
Station ® here- permitted in only the input of the values 01 to 80. For more
information on this programming mode, refer to the Central Station ® Manual
Chapter eighth
Owners of a Central Station "Reloaded" or Central Station 2 can easily mieren
programmed with DCC sound decoders. For the CS1 "Reloaded" please
proceed as described in the manual Chapter 18 ( "Decoder programming"). If
you use a Central Station 2 and Central Station 3, DCC programming is a little
trickier.
•
Insert a new locomotive manually. This also has successes gen when the decoder
hat.Die already reports automatically via mfx® reasonable address of the
locomotive is not important here.
• Call the new "dummy" locomotive on a controller.
• Call the Lok Edit menu and select the type "DCC"
• Call the Lok Edit function
• You now have to enter all CV's that you want to edit in the list. Only then the
panel will read out the values and save the changes back.
Alternatively, you can LokSound decoder 5, who signed autmatisch, directly via
the decoder menu mierrn programmed. However, not all options of the decoder
are there offered may. This compromise is necessary to use all available on the
market mfx® headquarters. Supply which these centers are assuming that it is
Märklin® decoder. When in doubt, DCC programming verwen- to.
8.2.7. Programming with LokProgrammer
The sold separately LokProgrammer 53451 offers the easiest and most
comfortable way to change the CVs of the sound decoders: Clicking on your
MS-Windows computer. The computer saves you searching for various CV
numbers and values. Refer to the documentation of LokProgrammer more
information. With the LokProgrammer all properties of ESU Deco are achievable.
Because access follows ER regardless of data format, this works well with mfx®
decoders. For LokSound 5 please use the software, version 5.0.0., Which is
available on our website to download!
Program
Summary of Contents for 58315
