Esu 58315, Installation And Operating Instructions Manual

Page: 40 / 112

40
Installing the decoder Installing the decoder
Solution 2: Use of a Seuthe® No. 11. Do not turn against häusemasse overall,
but against the blue return conductor of the decoder ( "U +").. This approach
eliminates the influence of asymmetric track signal the cleanest solu- would be
sung, although very difficult to implement.
6.10.8.1 smoke generator on LokSound 5 L
To the LokSound 5 L clocked a smoke unit can be connected directly, as they
are used in our locomotives of the ESU en- gineering Edition. The mechanism
has a 6-pin connection to the control electronics: 2x fan motor 2x heating
2x temperature sensor
The decoder evaluates the measurement data of the temperature sensor and
controls the heating based on the desired settings of the decoder. His
commands received by the smoke generator via the yellow cable. This is
required to meet the AUX1 output
be connected to the decoder. Only the AUX1 output is able to provide the data
after it has been configured accordingly (see section 12.5.1). Burnout because of
an empty tank can not therefore men vorkom-.
Please use only smoke generators ESU as spare parts offering or equivalent
parts with a temperature sensor (currently only available from ESU).
11.6. Connecting a wheel sensor
If you want to steam a steam engine in perfect synchronization with the wheel
rotation, you have to run a little effort and installing an external wheel sensor in
the locomotive. With all LokSound decoders 5 - except for the LokSound 5 mi-
cro - You can use various types of sensors: HALL sensors, reed contacts or
mechanical (grinding) con- tacts. The best result is achieved with a Hall effect
sensor in conjunction with (up to) four mini magnets.
BR 215/218 (solder pads underside!) (Item
35024.SP.09 / 35025.SP.09)
V60 (item 35410.SP.07) Class 66/77 (item 35050.SP.07)
If the fan motor is rotating in the wrong direction, then the connections "Fan +" and "Fan" exchange!
Figure 29: Pulsed smoke generator mechanics LokSound 5 L
ESU track zero smoke generator (item 54678)
fan +
Fan HTR + # 1 # 2
TMP (+ 5V) TMP # 1
# 2 HTR (U +) fan-
Fan +
HTR
+ 5V TMP
U + - fan
Fan +
HTR
+ 5V TMP
U + - fan
Fan
TMP HTR
U +
+ 5V