2
0
0
SAFETY WARNING
During the installation or use of control systems, users of Trio products must ensure that there is no possibility of injury to any
person or damage to machinery.
Control systems, especially during installation, can malfunction or behave unexpectedly. Bearing this in mind, users must
ensure that even in the event of a malfunction or unexpected behaviour, the safety of an operator or programmer is never
compromised.
ETHERNET CONNECTOR (RJ45)
A standard Ethernet connector is provided for use as the primary programming interface.
The Trio programming software,
Motion
Perfect, must be installed on a Windows based PC that is fitted
with an Ethernet connection.
0
Ethernet cable must be CAT 5e SF/UPT or better. (See EMC guide.)
SD CARD
The micro-SD Card slot allows a simple means of transferring programs, firmware and data without a PC connection. It Offers
the OEM easy machine replication and servicing.
The memory slot is compatible with a wide range of micro-SD cards up to 32 GB using the FAT32 compatible file system.
IP RESET
To reset the IP _ ADDRESS, IP _ GATEWAY and IP _ NETMASK to their default values press the IP reset button and power cycle the
controller while keeping the button pressed.
The factory default IP address is 192.168.0.250. This can be changed using the ETHERNET or IP_ADDRESS commands via
Motion
Perfect. To return to the factory IP address, hold the IP address reset switch in while powering up.
