Estate Swing E-S 500, Instruction Manual, Page: 18 / 55

E-S 500 / 502 Classic Series Instruction Manual
Installation of Operator —Pull-to-Open
2.7
Before permanently attaching any brackets, be sure to test arm motion
and clearance.
13) WITH THE GATE IN THE CLOSED POSITION
measure 53” from the center of the hole on
the boomerang bracket to the center of
the hole on the gate bracket - this should
be the position of the gate bracket on the
closed gate. [
See Fig. 7 ]
14) Additionally measure and mark the
gate mounting bracket so that it is vertically
centered on the horizontal bar.
15) To ensure that the gate mounting brack-
et is leveled, secure one side of the bracket,
check for levelness, and secure the other
side with provided carriage bolts, nuts, and
washers. [
See Fig. 8 ]
Fig 7
Fig 8
53”