Essilor Delta 2 Classic User Manual Download Page 70

Page: 70 / 158

USER MANUAL > MODIFYING THE LENS SHAPE

Delta 2 - Edging system > v2 - 08.16

Cancelling a modification

Press

once to cancel the last modification made to the shape.

Press

twice consecutively to return to the original shape.

Once the shape is modified, press

to save and go back to the centering screen.

3. Archiving/saving a shape

This function enables you to save a modified shape to a new job with a new ID while keeping the original job.

Press

You can also give it a different ID.

Enter a reference for the shape to be saved.

Press on

to confirm.

The job-creation alphanumeric keypad is displayed.

A new ID is allocated (first free slot in the selected list).

The shape is archived in a new job with a new ID and is displayed in the shape modification screen.

Summary of Contents for Delta 2 Classic































































































































































Search results

Summary of Contents for Delta 2 Classic

Reviews:

Related manuals for Delta 2 Classic

Brands by name

Popular brands

Essilor Delta 2 Classic, User Manual

Search results

Summary of Contents for Delta 2 Classic

Reviews:

Related manuals for Delta 2 Classic

Brands by name

Popular brands