manualshive.com logo in svg

Essilor Delta 2 Classic, User Manual

The Essilor Delta 2 Classic user manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidance for using the Essilor Delta 2 Classic product efficiently. Easily access the manual on manualshive.com and maximize the benefits of your Essilor Delta 2 Classic.

Share
Download
background image

USER MANUAL > CENTER AND BLOCK A LENS

Delta 2 - Edging system > v2 - 08.16

43

1.  

2.  

3.  

Zoom on the temporal area 

Zoom on the central zone

Zoom on the nasal area

c. Calling up a shape

In the job list

There are two ways of calling a shape in the job list:

Calling a shape via a barcode:

> scan the barcode using the barcode reader (optional).

Call a shape by selecting it in the job list:

> From the tracing screen or the centering screen, press on the menu 

 then 

 to access the shape storage screen.

>  You  can  then  look  for  a  job  by  ID,  reference,  date,  job  type  (drilled,  asymmetric  tracings,  creative  shapes).  For  more
information, consult the section 

.

Perform a trace > Management and storage of shapes>Legend screen 

(p.24)

On the tracer (if the connection to the tracer is activated)

There are 3 ways to call a traced job on a tracer and to carry out a 

:

job

(p.156)

Calling the current shape:

> Press 

 to display the shape being processed on the tracer.

Job called saved on the tracer:

Press for a few seconds to 

open the numeric keypad.

> You can then call a shape by the 

 which was allotted to it.

ID

(p.156)

Calling a shape via a barcode:

> scan the barcode using the barcode reader (optional).

> A warning message is displayed.

Summary of Contents for Delta 2 Classic































































































































































Reviews:

No comments

Related manuals for Delta 2 Classic

SNOWJOE Sunjoe SJEDGE7-RM Manual preview
Sunjoe SJEDGE7-RM
Brand: SNOWJOE Pages: 16

Brands by name

Popular brands

Load more brands