Essilor Delta 2 Classic User Manual Download Page 136

Page: 136 / 158

USER MANUAL > MAINTENANCE & SERVICING

136

Delta 2 - Edging system > v2 - 08.16

Import on the tracer-centerer-blocker

a previously created backup

jobs and the setting of another Delta 2 tracer-centerer-blocker.

Connect the backup USB key to the tracer.

Fromyour work screen, select

Press

to import the data present on the backup key.

Click on

to import a display customization:

If several backups are present on the key, make sure to choose carefully what you want to restore: the data present
on your tracer will be erased and overridden by the data of the backup that you selected.

Check the product serial number and the date and time of backup.

Press

to start the operation.

Remove the USB key.

The backup screen is displayed.

A message is displayed asking you to remove the USB key.

The product restarts with the selected configuration.

Summary of Contents for Delta 2 Classic































































































































































Search results

Summary of Contents for Delta 2 Classic

Reviews:

Related manuals for Delta 2 Classic

Brands by name

Popular brands

Essilor Delta 2 Classic, User Manual

Search results

Summary of Contents for Delta 2 Classic

Reviews:

Related manuals for Delta 2 Classic

Brands by name

Popular brands