Essilor Instruments VISION-R 700, User Manual

Page: 17 / 128

1
2
3
1
2
1. Configure the instrument
Turn on the instrument
During the first powering up of the instrument, press the ON/OFF switch on the power supply unit.
For future instrument use, the power unit can stay turned on.
In this case, go directly to step 2.
Press on the ON/OFF switch [Clear] on the console.
Then, press the ON/OFF switch on the chart screen.
Turn off the instrument
Press and hold the ON/OFF switch [Clear] on the console.
Hold the switch down until the console turns off.
a. Set the instrument data to zero
At the end of each examination, it is possible to set the instrument data to zero. The expert can then start a new
session with a new patient.
Restoring the instrument data can be carried out:
On the console keyboard, by quickly pressing on the key [Clear].
On the touch screen, by pressing on > .
The system is initialized (refraction head and console). >
The instrument is ready to be used. >
The message [Clear all dated] is displayed. >
The console turns off. >
U
SER MANUAL
> A
DJUSTMENTS BEFORE THE EXAMINATION
17 Vision-R 700 - Essilor automatic phoropter > V1 - 09-2020